FloorsDecks

Vancouver WA · Portland OR

From Garage Floors to Rooftop Decks.

One coatings company. Epoxy and polyaspartic floors and Westcoat ALX Pro waterproof decks, prepared, built and warrantied to the same standard.

5-Year Workmanship WarrantyIn writing, on every coating
Westcoat QCAQualified Contractor Applicator
Up to 20-Year Manufacturer WarrantyOn ALX Pro, depending on the build
Free In-Home EstimatesReal sample boards brought to you
9+ Years in the NorthwestLocally owned in Vancouver WA

What we coat

We coat anything and everything.

Garage floors, shops, patios, steps, walkways, decks, balconies and rooftops. The surfaces change. The craft does not: meticulous prep, a system built in layers, and a written warranty when we are done.

Epoxy & polyaspartic

Garage & shop floors

Concrete prepared by diamond grinding or shot blasting, a 100% solids epoxy base, full flake and a polyaspartic topcoat.

Flake floors →

ALX Pro over concrete

Steps, walkways & patios

Plain concrete transformed with decorative tile, stone and paver-pattern finishes.

Patio coatings →

Westcoat ALX Pro

Decks & balconies

A waterproof walking deck system, Class A fire rated, for decks, balconies and landings.

Deck coating →

Cable · Glass · Aluminum

Railing

Added to any deck coating project and installed by the same crew.

Railing options →

Inside the coating

Two systems. One standard.

A coating is only as good as what is underneath it. Both of our systems start with a properly prepared surface and are built up one layer at a time, each with a specific job.

For concrete floors

Epoxy & polyaspartic floor system

12345
  1. Concrete slabDiamond ground or shot blasted, never acid etched. Cracks and spalls repaired.
  2. 100% solids epoxy baseA thick base coat that bonds into the opened-up concrete.
  3. Full flake broadcastFlake thrown into the wet base until no more will stick.
  4. Flake Lock coatLocks the flake down and knocks off the sharp edges.
  5. Polyaspartic topcoatA clear, tough wear layer that stands up to hot tires, oil and chemicals.

For decks, balconies & concrete

Westcoat ALX Pro deck system

1234567
  1. Plywood or concreteFailing surfaces removed, framing repaired and new plywood installed where needed. ALX Pro also goes over concrete.
  2. Sheet membraneApplied over every plywood seam.
  3. Reinforcing lathFastened across the deck to anchor the system.
  4. Base coatPolymer-modified cement troweled into the lath.
  5. Fiberlath membraneA reinforced waterproofing membrane.
  6. Slurry and texture coatsBuild the walking surface and the decorative finish.
  7. Acrylic topcoatTwo coats seal the finished surface. Class A fire rated system.

Different surfaces, different chemistry. The same discipline from the first pass of the grinder to the final coat.

Preparation

Prep is where coatings last or fail.

Floors

Every slab is diamond ground or shot blasted, never acid etched, so the epoxy bonds into the concrete instead of sitting on top of it. Cracks and spalls are repaired before the first coat.

Decks

Failing surfaces come off. Damaged framing is repaired and new plywood goes down where it is needed, so the ALX Pro system starts on a sound, flat substrate.

Before & after

Same crew. Same result.

Drag the handle to compare. Tap the corner icon to inspect every detail full screen.

Garage concrete after diamond grinding, before coating
Finished flake epoxy garage floor
BeforeAfter

Garage floorEpoxy & polyaspartic flake system

Plain concrete entry steps before coating
Entry steps finished with a stone-pattern ALX Pro coating
BeforeAfter

Entry steps & patioALX Pro over concrete

Flake system colors

Choose your flake blend.

Flake floors come in over 40 blends, from soft grays and earth tones to bold, high-contrast mixes. These are some of the most requested. Select any color to see it up close, and we bring real sample boards to your free estimate so you can choose in your own space.

Mountain FogFlake blend
Winter CabinFlake blend
GraphiteFlake blend
QuartziteFlake blend
ThunderFlake blend
MidnightFlake blend
GravelFlake blend
Moon RockFlake blend
StealthFlake blend
Desert StormFlake blend
KodiakFlake blend
Winter AshFlake blend

Recent work

Look closer.

Every photo is one of our own projects. Open any image and zoom in on the finish.

See all of our work →

Railing

Finish the deck with railing.

Railing can be added to any deck coating project. We offer cable, glass and aluminum railing, installed by the same crew as part of the same project.

Cable

Slim lines that keep the view open.

Glass

Uninterrupted sightlines and a clean, modern edge.

Aluminum

Low-maintenance, durable and sharp on any home.

Built for the Northwest

We install year-round.

RainWe tent the work area with tarps so the installation can continue.
Summer heatWe schedule installation for the cooler early morning or evening hours.
ColdWork pauses only when temperatures fall below the manufacturer’s minimum.

5-year workmanship warranty

Every floor and deck coating we install is backed by our own written workmanship warranty.

Up to 20-year manufacturer warranty

As a Westcoat Qualified Contractor Applicator, ALX Pro decks qualify for up to a 20-year Westcoat warranty, depending on the build.

Questions

Good to know.

Every project starts with a free in-person inspection and a written quote.

Request a Free Estimate →
What surfaces do you coat?

Concrete floors in garages, shops and basements, plus patios and driveways, with epoxy and polyaspartic floor systems. Decks, balconies, landings and covered porches, plus concrete steps, walkways and patios, with the Westcoat ALX Pro waterproof walking deck system. We also install cable, glass and aluminum railing.

How do you prepare the surface?

Concrete floors are prepared by diamond grinding or shot blasting, never acid etching, and cracks and spalls are repaired before any coating goes down. On decks we remove the failing surface, repair damaged framing and install new plywood where it is needed before the ALX Pro system is applied.

What warranty do you offer?

Every coating we install carries our 5-year workmanship warranty, in writing. As a Westcoat Qualified Contractor Applicator, ALX Pro decks also qualify for up to a 20-year Westcoat manufacturer warranty, depending on the system and the surface it is installed over.

Do you install in the rain and through the winter?

Yes. We install year-round. In rain, we tent the work area with tarps, and in summer heat we schedule installation for the cooler early morning or evening hours. Work pauses only when temperatures fall below the manufacturer’s minimum.

Can ALX Pro go over concrete?

Yes. In addition to plywood decks, the ALX Pro system can be applied over concrete, including entry steps, walkways, porches and patios, with decorative tile, stone and paver-pattern finishes. The system is Class A fire rated.

How is my project priced?

Every surface is different, so we price each project after a free in-person inspection, and your exact price comes as a written quote. Removal of old or failing coatings, when needed, is included in that quote.

Service areas

Vancouver WA to the Portland metro.

We install floors and deck coatings across Clark County and the Portland metro, from Longview to Wilsonville.

Vancouver WA · Portland OR metro

Your next surface starts here.

Free in-person inspection and a written quote for floors, decks, steps, patios and railing, anywhere from Vancouver WA to the Portland metro.

CallTextRequest a Free Estimate